henrich

  • Phone: 630 822 4647

Industrial Ethernet


Solutions

Featured White Paper

ringopenRingOpen Redundancy (ROR)：Our patent-pending RingOpenTM Redundancy technology has equipped Henrich's .……


ringonRingOn Redundancy：RingOn redundant recovery technology has been deployed in all Henrich's layer 2 and layer 3 industrial ……


SFP Modules

G-SFP-W Series

 

  • Single + 3.3V power supply
  • Differential Inputs and Outputs
  • Small Form Factor Pluggable MSA Compliant.
  • Class 1 Laser International Safety Standard IEC 825 Compliant. Complies with    EN60825-1 and FDA 21 CFR 1040.10 and 1040.11
  • Industrial Operation Temp.: －40℃ to +85 ℃
  • RoHS Compliant

    •  

    • Details
    • Specs
    • Models
    • Downloads
    G-SFP-W Series
    The transceiver from Henrich is small form factor pluggable module with standard duplex connector for fiber communications. This module is designed for mutil-mode-fiber (MMF) and operates at a nominal wavelength of 1310 nm with cost effective and high performance. It is withthe SFP 20-pin connector to allow hot plug capability. Mutil-model/1310nm/1.25G/2KM/3.3v/Industrial Wide Temperature.
    Absolute Maximum Ratings
    Supply Voltage 0~4V
    Storage Temperature -40 to +85˚C
    Operating Temperature  -40 to +85˚C
    General Specifications
    Data Rate 0.8 to 1.5Gbps, Typ: 1.25Gbps
    Supported Link Length
    on 62.5/125μm MMF    		 2Km
    Supply Current Max: 300mA
    Power Dissipation Max: 1000mW
    Transmitter Electrical Characteristics
    Supply Voltage 3.15 to 3.45V, Typ: 3.3V
    Data Differential Input Voltage 400 to 2000mV
    Disable Input Voltage -1.81 to -1.48V
    Enable Input Voltage  -1.16 to -0.88V 
    Transmitter Optical Characteristics
    Output Optical Power
    on 62.5μm MMF    		 -10 to -0dBm
    Center Wavelength 1280 to 1340nm, Typ: 1310nm
    Spectral Width (RMS) Type: 2nm
    Optical Rise Time (20%-80%) Max: 0.26ns
    Optical Fall Time (20%-80%)  Max: 0.26ns 
    Extinction Ratio  Min:8.2dB 
    POut@TX Disable Asserted  Max:-45dBm 
    Receiver Electrical Characteristics
    Supply Voltage 3.15 to 3.45V, type:3.3V
    Data Differential Output Voltage 500 to 1200mV
    Data Output Rise Time (20%-80%) Max:0.35ns
    Data Output Fall Time (20%-80%)  Max:0.35ns 
    Receiver Optical Characteristics
    Maximum Receiver Power Min: -3dBm
    Receiver Sensitivity Max: -20dBm
    Operating Wavelength 1100 to 1600nm
    Signal Detect-Asserted  Max: -20dBm avg. 
    Signal Detect-Deasserted  Min: -36dBm avg. 
    Signal Detect-Hysteresis  Min: 0.5dB 
    Model No. Description Price
    G-SFP-W Single Mode Fiber Port with LC Connector, 2KM, TX1310nm, 1.25G, Industrial Wide Temperature:-40°C to +85°C. Quote
    Downloads
    Datasheet